Best Fluke 117 Case: 4 Hard Cases Compared

As an Amazon Associate we earn from qualifying purchases. Details

A Fluke 117 case should hold the meter snugly, leave room for the leads and survive a ride in a service van. Four of the candidate products name the 117 in their listings and are real cases, each from a different brand, so this guide compares those four. They differ in size, weight, compartments, straps and how clearly they state the fit. Several listings also contradict themselves on dimensions or compartment counts, and this guide flags each one. It helps you decide which case suits a lone meter, a meter with accessories, or a meter plus a second instrument.

Quick answer

Choose the first option if you want a case bundled with a magnetic hanging strap kit. Choose the second if you want a plain hard case with an elastic strap, a zippered mesh pocket and a wrist strap. Choose the third if you carry a second instrument and want a larger case with several compartments. Choose the fourth if you want a case with a cross-body shoulder strap, a 0.28 kg weight and a 2 Year warranty.

Only four brands qualify, so there is no fifth pick. The rest of the candidate list was cases for other Fluke models, a voltage pen case, a hanging strap sold without a case, and the meter itself. None of the four listings includes the multimeter, so you buy the case alone.

What matters when you pick a Fluke 117 case

A case does not change what the meter measures, so the criteria are about fit, protection and carrying. A carrying case also has no safety category of its own. Measurement category is an IEC classification of live circuits, and the 117’s own rating comes from its listing and manual, not from the case.

Stated fit for the 117

All four name the 117 somewhere. The first lists 117/115/116/114/113 in the title. The second lists 117 first in a longer set. The third lists Fluke 113-117 in the title and “Fluke 101, 106, 107, 113, 114, 115, 116 and 117″ in a bullet. The fourth lists 117 inside a long list of models. Still, an entry in a model list is not proof of a tight fit, so look for dimensions.

Interior size against the meter

The Fluke 117’s own listing gives 6.67 x 3.31 x 1.82 inches and 689 g. The first pick’s bullet gives an inner size of 7.485.311.8 in. The other three give no inner size. Without that number you are trusting the model list.

Compartments and pockets

The second lists 2 compartments with a zippered mesh pocket, the third lists 6 in its specs and describes three independently zippered compartments plus mesh pockets, and the fourth lists 3 compartments with a mesh pocket. The first has a case and a strap kit and does not list compartments.

Straps and carrying

The first adds slings, a hanging magnet, a hanging clip and a snap adapter. The second has a wrist strap, the third a reinforced nylon webbing handle, and the fourth a cross-body shoulder strap. Choose by how you move between jobs.

Weight and warranty

The third weighs 14.08 ounces and the fourth 0.28 kg. The fourth lists a 2 Year manufacturer warranty. The first and second list no weight or warranty.

Materials and closure

Each listing names its shell material, and they are not the same. The first and second are hard EVA with a velvet or scratch-resistant lining. The third combines a 1680D nylon exterior with closed-cell EVA and a velvet lining, and describes the exterior as water-resistant against toolbox abrasion and light splashes. The fourth is polyester with a hard shell and a YKK zipper in the title. The second adds a double-zipper closure that opens with one hand. If you work around dust or splashes, a stated water rating helps, but none of the four claims to be waterproof.

Cases that fit a Fluke 117 case search

Four products qualify. Each card shows the specs, pros and cons from the listing.

How each pick compares

First pick: case and magnetic hanging kit

The first pick is a hard EVA case bundled with a magnetic hanging strap kit. The listing says the interior is lined with soft velvet cloth, and the kit includes 2 slings of different sizes, a hanging magnet, a hanging clip and a snap adapter. It lists compatibility with Fluke 117/115/116/114/113, 101/106/107 and a KAIWEETS model.

Its dimensions contradict themselves. The spec table gives 11.02 x 2.17 x 4.13 inches, while a bullet gives an outer size of 85.72.36 in and an inner size of 7.485.311.8 in. Rely on neither until the seller confirms. The power field also says Battery Powered, which makes no sense for a case. Skip it if you do not want a hanging kit or need dependable sizes.

Second pick: plain hard case with elastic hold

The second pick is a hard EVA case with a zipper, a wrist strap, 2 compartments and a black and yellow finish. The listing says an elastic strap holds the multimeter, a zippered mesh pocket keeps small items such as batteries or probes in place, and the lining is soft and scratch-resistant. It lists a double-zipper closure.

It names 117 first in a list that also includes 15B+, 17B+, 115, 116 and 101. The listing gives no weight or dimensions, so you cannot check the fit against the meter’s size. Skip it if you need numbers before buying.

Third pick: the larger multi-bay case

The third pick is a case for two instruments. It lists 14.08 ounces, 11.3″L x 4″W x 5.12″H, water-repellent materials, a 1680D nylon exterior, closed-cell EVA, a velvet lining and a reinforced nylon webbing handle. The bullets describe separate instrument bays, retaining straps and dedicated spaces for fuses, alligator clips and small tools.

Two points need care. The listing says 6 compartments while a bullet describes three independently zippered ones plus dual mesh pockets. Its highlight also names Fluke 101/106/107 and asks you to verify other models, so confirm the 117 with the seller. It is the largest here, so skip it if you carry one meter and want a small case.

Fourth pick: cross-body strap and 2 Year warranty

The fourth pick is a hard polyester case weighing 0.28 kg with a cross-body shoulder strap, 3 compartments, a water resistant rating, removable foam you can cut and an attachable strap in the middle to hold the meter. It lists a mesh pocket, a YKK zipper in the title and a 2 Year warranty.

The listing gives no outer or inner dimensions, so the fit relies on the model list and the removable foam. Skip it if you want a bundled magnetic hanger or a lighter case.

Side-by-side comparison

Feature	First	Second	Third	Fourth
Strap or carry	Slings, magnet, clip, adapter	Wrist strap	Nylon webbing handle	Cross-body shoulder strap
Compartments	Not listed	2	6 (spec) or three zippered (bullet)	3
Weight	Not stated	Not stated	14.08 ounces	0.28 kg
Inner size	7.485.311.8 in (bullet)	Not stated	Not stated	Not stated
Warranty	Not stated	Not stated	Not stated	2 Year

Which one to choose

You carry one meter and a few leads. The second pick matches that job with an elastic hold and a mesh pocket.

You hang the meter on conduit or a rail. The first pick bundles the magnet and clip. Confirm its dimensions with the seller first.

You carry a second tester or a clamp meter. The third is the only listing built around instrument bays. It also names Klein tools, so check the 117 fit.

You work out of a bag and want a strap. The fourth has the shoulder strap and the longest stated warranty.

If you are still deciding between meters, see Fluke 87V vs 117. For more extras, see Fluke 117 accessories, alligator clips for Fluke multimeters and the Fluke 117 itself. A smaller meter family has its own guide in Fluke 115 cases.

What about a Fluke 87V case?

If you searched for a fluke 87v case, note that none of the four listings names the 87V. The only mention of 87V in the candidate list is a hanging strap, which is not a case. The 87V is a different model from the 117, so do not assume the same case fits. Check each listing’s model list and the dimensions before you order.

The 117’s listing gives 6.67 x 3.31 x 1.82 inches and 689 g.

Fit against the first pick’s bullet inner size, 7.485.311.8 in:

• Length margin: 7.48 − 6.67 = 0.81 in. Check: 6.67 + 0.81 = 7.48.
• Width margin: 5.31 − 3.31 = 2.00 in. Check: 3.31 + 2.00 = 5.31.
• Height margin: 1.8 − 1.82 = −0.02 in. Check: 1.82 − 0.02 = 1.8.

The negative height margin means the listed meter thickness is slightly more than the listed inner height. A soft lining may give, but the numbers leave no room, so ask the seller before you buy. Remember too that the same listing’s spec table gives different dimensions.

Carrying weight with the meter inside:

• Fourth pick: 689 g + 0.28 kg. Convert 0.28 kg = 280 g. 689 + 280 = 969 g.
• Third pick: 14.08 ounces × 28.35 g per ounce ≈ 399 g. 689 + 399 = 1,088 g, about 1.09 kg. Check: 1,088 − 689 = 399.

The difference between the two is 1,088 − 969 = 119 g, which is just over 4 ounces (119 ÷ 28.35 ≈ 4.2). The third pick holds more, and you carry more weight for it.

Three buying scenarios

The electrician who hops between jobs. You carry the meter, two leads, a pair of probes and a non-contact voltage detector. The second pick is built around that load: an elastic strap for the meter, a zippered mesh pocket and a wrist strap. Its listing mentions room for test leads, probes and non-contact voltage detectors. The third is roomier but heavier, at 14.08 ounces.

The facilities tech with a second instrument. If you carry a clamp meter or a receptacle tester next to the 117, the third pick’s instrument bays and retaining straps are the point of the case. Its listing says the separate bays help stop two meters from stacking against each other. Check that the 117 itself fits, because the highlight line asks buyers to verify models beyond 101, 106 and 107.

The homeowner with a single meter in a drawer. You do not need a shoulder strap or a second bay. The second pick is simpler, and the fourth adds foam you can cut and a 2 Year warranty if you want to shape the interior around the meter. The first is worth considering only if you will really hang the meter on a metal surface.

What to ask the seller before you order

The four listings leave gaps, so a short message saves a return. Ask for the inner length, width and height in inches, because only one listing gives them. Ask whether the elastic strap or foam can be adjusted for a 117 plus leads. Ask whether the 117 specifically was checked, since the third listing’s highlight asks buyers to verify models. Ask for the case weight if it is missing, which applies to the first and second picks. Finally, confirm that the listing is case only. The first states that kits do not contain multimeters, and the others say case only or tester not included.

Worked example: comparing the longest listed figures

The KingSung bundle’s longest listed figure is 11.02 inches, and the third pick’s listed product dimensions are 11.3 inches long. The difference is 11.3 inches minus 11.02 inches, which equals 0.28 inches. That gap is small, so the choice between these two should rest on compartments and included parts instead.

Common mistakes when buying a Fluke 117 case

1. Trusting the model list as proof of fit. All four name the 117, but only one gives an inner size, and that size leaves no height margin.
2. Ignoring contradictory dimensions. The first pick lists two sets of sizes. Do not rely on either.
3. Assuming the case includes the meter. The listings say case only or kits without multimeters.
4. Expecting a safety rating. A case has no CAT rating in these listings. Check the meter’s own listing and manual.
5. Buying the biggest case. If you carry one meter, extra bays add weight and hold the meter loosely.

FAQ

Will a Fluke 117 fit in these cases?

All four name the 117. Fit still depends on size. Only the first pick states an inner size, and it leaves almost no height margin against the 117’s listed 1.82 inches.

Do any of the cases include the meter?

No. The listings state case only or note that kits do not contain multimeters.

Which case has a shoulder strap?

The fourth pick lists a cross-body shoulder strap. The second lists a wrist strap, and the third a reinforced nylon webbing handle.

Can I carry test leads and probes?

The second and fourth list mesh pockets, and the third has dual mesh pockets and a dedicated accessory section. The first does not list compartments.

Is there a case for the Fluke 87V?

None of the four listings names the 87V. Check the model list on any case before ordering.

Is the case waterproof?

The listings use words such as water repellent and water resistant. None states a waterproof rating, so avoid treating any of them as sealed.

Which has a warranty?

Only the fourth lists one, 2 Year. The others do not state a warranty.

Bottom line

For a simple one-meter case, take the second pick. For a hanging kit, take the first after confirming its dimensions. For two instruments, take the third. For a strap and a stated warranty, take the fourth. If a case does not state an inner size, ask the seller before you buy.

Sources

• Measurement category (Wikipedia): explains CAT classification, supporting the point that the meter’s rating comes from the meter, not the case