Digital analog and panel voltmeters compared on a clean electronics workbench.

Best Buy Voltmeter

As an Amazon Associate we earn from qualifying purchases. Details

A voltmeter reads voltage, and most of the listings in this group are multimeters that also read current and resistance. This buying guide covers the five meters in the research file whose listings state a voltage range or a voltage function. Two USB power testers and three automotive test lights are left out, because they measure USB charging or car circuits rather than general voltage. Figures were checked on 11 October 2026 and are shown as the sellers give them.

Quick answer: for general household and bench work, the AstroAI 2000 count meter has the fullest stated specification. The TESMEN TM-510 is the choice when you want a non-contact voltage check in the same meter. The SNAKOL pen suits a quick single-point check. The ANENG and LJPXHHU listings give the fewest numeric specs, so check the range before you buy.

The five voltmeters at a glance

Meter Voltage range stated Non-contact check Form
AstroAI 2000 Count (B01ISAMUA6) DC 200 mV to 600 V; AC 200 V and 600 V Not stated Handheld multimeter
LJPXHHU XL830L (B0CXM242J1) AC and DC voltage, no range in the listing text Not stated Handheld multimeter
ANENG SZ301 (B0BYD32JZV) DC 200 mV to 600 V; AC 200 mV to 600 V Yes (NCV sensing) Handheld multimeter with case
TESMEN TM-510 (B0BLZ7GN2X) AC 0.8 V to 600 V; 4000 counts Yes, visual and audible alarm Handheld multimeter
SNAKOL SK216 (B0D69TGPHS) AC and DC 2 V to 600 V Yes (analog bar) Pen-style multimeter

How we chose these five

We kept the meters whose listings state a voltage range or a voltage function. The Lscsdf FS899L listing is a multimeter as well, but it was left out to keep the list at five. The YOJOCK and YEREADW items are USB C testers that read the voltage and current of a charger, and the Young Dance item is a set of test leads. The WINAMOO, JASTIND and ATOBLIN listings are automotive test lights. We did not test any of these meters, and nothing below reports personal use. Where a listing contradicts itself, both figures are shown.

1. AstroAI Digital Multimeter Tester 2000 Counts

The listing gives DC voltage ranges of 200 mV, 2 V, 20 V, 200 V and 600 V, with an accuracy of ±(0.5%+3). Its AC voltage ranges are 200 V and 600 V, at ±(0.8%+5). The meter has a 2000 count display, manual range selection and a CAT II 600 V rating. It runs on two 1.5 V AAA batteries and weighs 0.15 kg. The spec sheet gives a sample speed of 3 times per second, but a bullet in the same listing says 2 times per second, so the two figures are shown here side by side. Check the AstroAI 2000 Count on Amazon.

2. LJPXHHU Digital Multimeter XL830L

The LJPXHHU listing says it measures AC and DC voltage, DC current, resistance, continuity, diodes and batteries. It describes a 2.7 inch backlit LCD, data hold, and a fold-out stand that lets the meter stand upright on a bench. The listing says overload protection applies on all ranges. It does not state a voltage range in the text used for this post, so the top voltage cannot be given from this data. The listing gives a weight of 166 g and a size of 5.51 inches by 2.56 inches by 1.18 inches. Check the LJPXHHU XL830L on Amazon.

3. ANENG Digital Multimeter with Case SZ301

The ANENG listing gives DC voltage from 200 mV to 600 V at ±(1%+5), and AC voltage from 200 mV to 600 V at ±(2.0%+10). Its maximum count is 2000, shown on an LED screen. It lists a battery test for 12 V, 9 V and 7.5 V batteries, which is useful for a car or a remote-control battery. Its features include non-contact voltage sensing, auto shut-down, double fuses and diode testing. It weighs 155 g. Check the ANENG SZ301 on Amazon.

4. TESMEN TM-510 Digital Multimeter

The TESMEN listing gives 4000 counts and an auto-ranging mode, with AC voltage from 0.8 V to 600 V at ±(1.2%+5). It states a true RMS frequency response of 40 Hz to 1 kHz. A non-contact voltage check sounds an alarm and lights a visual warning when voltage is near the probe. The listing says the meter is CAT II 600 V, CE, UKCA and RoHS certified. It includes data hold, auto shutdown, a low-battery indicator, a backlight and a flashlight, and weighs 0.1 kg. Check the TESMEN TM-510 on Amazon.

5. SNAKOL SK216 Pen Type Digital Multimeter

The SK216 is a pen-style meter. Its listing states AC and DC voltage from 2 V to 600 V, a continuity buzzer that sounds below 50 ohms, and a non-contact analog bar that beeps as the probe nears a live conductor. The LCD has a backlight. The listing gives a length of 7.28 inches and a width of 1 inch. Its included-components field reads “no”, so check the package contents before you buy. Check the SNAKOL SK216 on Amazon.

Worked example: how accurate is a 12 volt reading on the AstroAI?

Take a car battery that reads 12 volts on the AstroAI’s 20 V DC range. The listing gives an accuracy of ±(0.5%+3). The 0.5 percent part is 0.06 volts (0.5 percent of 12 is 0.06). The meter has 2000 counts, so on a 20 V range each count is 0.01 volts, and the 3-count part is 0.03 volts. The total is ±0.09 volts, which means the true value sits between 11.91 and 12.09 volts. The listing does not give the 20 V resolution directly, so this figure assumes the 2000 count display is used on that range.

What the listings do not say

The LJPXHHU listing does not state a voltage range in the text used here. The TESMEN listing gives a 0.8 V floor for AC, and the SNAKOL listing gives 2 V for both AC and DC. None of the five listings gives an independent accuracy test, and the AstroAI sample speed conflicts with its own bullet. The SNAKOL included-components field reads “no”, which may be a data error, so confirm the contents with the seller.

Frequently asked questions

Which voltmeter in this list has the widest DC voltage range?

The AstroAI and ANENG listings both state DC voltage from 200 mV to 600 V. The SNAKOL listing gives 2 V to 600 V for DC, and the LJPXHHU listing does not state a range in its text.

Which of these meters can check voltage without touching a wire?

The ANENG, TESMEN and SNAKOL listings each state a non-contact voltage function. The AstroAI and LJPXHHU listings do not state one in the text used here.

What does the count figure mean?

The count is the number of steps a meter can display on a range. The AstroAI lists 2000 counts and the TESMEN lists 4000 counts. More counts give finer steps on the same range, so a 4000 count meter shows smaller differences.

Can the SNAKOL pen read a battery voltage?

Its listing gives DC voltage from 2 V to 600 V, which covers common battery voltages. The listing does not mention a battery test mode, so the ANENG listing is the better choice if you want a dedicated battery test.

Are these voltmeters rated for mains use?

The AstroAI listing gives CAT II 600 V, the TESMEN listing gives CAT II 600 V, and the ANENG listing mentions anti-burn double fuses. The LJPXHHU and SNAKOL listings do not state a category rating in the text used here.

Conclusion

For general voltage work, the AstroAI and ANENG listings state the fullest DC voltage ranges, and the TESMEN adds a non-contact check. Choose the SNAKOL pen for a quick single-point check, and confirm its contents first. For related reading, see best digital voltage meter for car, best digital volt meter, digital voltmeter, DC voltmeter and best multimeter.

AstroAI 2000 Count on Amazon · LJPXHHU XL830L on Amazon · ANENG SZ301 on Amazon · TESMEN TM-510 on Amazon · SNAKOL SK216 on Amazon

Similar Posts