Best Milwaukee 2212 20 Auto Voltage Continuity Tester
As an Amazon Associate, this site earns from qualifying purchases at no extra cost to you.
If you are searching for the milwaukee 2212-20 auto voltage continuity tester, you want a small meter that switches between voltage and continuity checks without a dial. The Milwaukee 2212-20 is listed at 600V AC/DC with a CAT IV 600V rating, a backlit LCD and an LED worklight. This guide compares four models from our product list that handle similar electrical checks, and it explains what each listing states and what we could not confirm.
Quick answer
For a mix of voltage and continuity checks, the KAIWEETS meter has the closest title match. For voltage work alone, the Klein Tools MM420 is the stronger pick. For vehicle circuit faults, the Autel PowerScan PS100 is the better fit. For continuity only, the Gardner Bender CT6101 keeps things simple.
About the Milwaukee 2212-20
The Milwaukee 2212-20 is an auto-function meter. Retailer listings describe it as switching between voltage and continuity testing on its own, and they list a continuity function on the same unit. Three retailer pages we opened agree on the core facts: 600V AC/DC voltage, a CAT IV 600V safety rating, and a continuity function. Two of them list a 5-year tool warranty. The included items are a test lead set, a belt clip, two AAA batteries and a manual.
One detail matters for buyers comparing it with other testers. The retailer copy says the unit uses “auto-function sensing” rather than the term auto-ranging. That wording is a small difference, but it changes what you should check on other models. A tester that auto-ranges will pick a measurement range for you, while a tester that auto-senses picks a function. Both can save time, yet they are not the same feature.
The Milwaukee 2212-20 itself is not in our product list, so none of the picks below is that exact tool. The models below are the closest matches we could support with a product entry in our list. If you already own a Milwaukee meter, the notes on continuity and CAT rating in each section still apply when you compare.
How we chose
We started with the product list and kept only items whose listing title points to one of three jobs: automatic range or function selection for voltage, a continuity check, or a circuit probe that can show a short or open. We set aside battery load testers, infrared thermometers and outlet-only testers, because they answer different questions. Breaker finders with no voltage or continuity function were also left out.
Next we checked each remaining title for the facts it actually states. We did not add specs from memory. Where a title did not mention continuity, we say so in that model’s section instead of filling the gap. We also looked at the three retailer pages for the Milwaukee unit so that the reference section reflects what the listings say, not what we expect a meter of that class to do.
Finally we limited the list to four picks, because the product list does not contain a second model with a clear 600V CAT IV rating. That is a real limit of this roundup, and we flag it again in the next section.
What we could not verify
The Milwaukee 2212-20 pages we opened do not list an accuracy figure, so this guide does not state one. We also did not find a continuity buzzer threshold or a resistance range on those pages, and we did not confirm the battery life claim that appears in some third-party text. Treat any number you see elsewhere as unchecked until it appears on the manufacturer’s own page.
For the alternatives, we worked from Amazon listing titles in our product list. Titles are short, so some features we would like to compare, such as CAT rating, input impedance or continuity beep threshold, are missing for most picks. We have not opened full product detail pages for each pick in this draft. We also did not check prices, star ratings or warranty terms for the alternatives, and this article does not claim them.
Finally, the product list has no entry for a 600V CAT IV auto-function meter other than the picks below. If you need the exact Milwaukee model, buy it from a retailer you trust and confirm its rating on the label.
Our picks
1. KAIWEETS Smart Multimeter with auto-ranging and continuity
The listing title for this KAIWEETS meter describes a rechargeable tester with auto-ranging digital voltage readings. It names voltage, current, resistance, continuity, capacitance, temperature, frequency and NCV among its measurements, and it gives a 6000-count display with TRMS. For a buyer who wants one tool that covers the same continuity and voltage checks as the Milwaukee unit, this is the closest title on our list. The rechargeable battery is a difference from the Milwaukee, which takes AAA cells, so check the battery plan before you buy.
2. Klein Tools MM420 Auto-Ranging TRMS Multimeter
The Klein Tools MM420 is listed as an auto-ranging TRMS digital multimeter with 600V AC/DC voltage, 10A AC/DC current and 50 MOhm resistance. Those figures are in the title, and they make the MM420 a strong voltage meter. The title does not mention continuity, so we cannot say from our list whether it has a continuity function. If your main job is voltage checks and you only need continuity now and then, verify that function on the Klein product page before you commit.
3. Autel PowerScan PS100 Circuit Tester 2.0
The Autel PowerScan PS100 is a circuit probe for 12 to 24V automotive systems. Its listing title lists short and open circuit finding, plus AC/DC, resistance, component, signal and test light functions, and it comes with a 20 ft extension cord. This is not a general-purpose voltage meter. It fits best when you are tracing a fault in a vehicle, and it is a weaker choice for mains voltage work. We include it because the Milwaukee 2212-20 is often bought for the same kind of automotive troubleshooting.
4. Gardner Bender CT6101 Heavy Duty Continuity Tester
The Gardner Bender CT6101 is a dedicated continuity tester. Its title gives two ranges and a 36-inch lead. A dedicated tester is simpler than an auto-function meter, and that is the point: it checks for a closed path and nothing else. If you only need continuity on wires, fuses and switches, a single-purpose tool like this can be easier to read and less likely to be used on the wrong range. It does not replace a voltage meter, so pair it with one if you need both.
How to choose between these tools
Start with the job. If you measure AC and DC voltage most days, a multimeter such as the KAIWEETS or the Klein MM420 gives you more range. If you mostly check continuity, a dedicated continuity tester such as the CT6101 is simpler and cheaper to keep in a bag. For vehicle wiring, a circuit probe like the PS100 can show a short or open faster than a multimeter, but it works at automotive voltages and is not a substitute for a CAT-rated meter on mains circuits.
Next, check the safety rating before you touch live parts. The Milwaukee 2212-20 is listed at CAT IV 600V, which is the rating most people look for in a handheld meter. Compare that line with each alternative’s listing. If a listing does not state a CAT rating, do not assume one.
Finally, think about how you will read the display. A backlit LCD helps in dim crawl spaces and car interiors. An LED worklight helps when you are working inside a panel. Those features are listed for the Milwaukee, and they are worth comparing against any alternative before you buy.
Test leads matter as much as the meter. Look at the probe tips, the lead length and whether the leads are sold as a set with the tool or separately. A short lead can be awkward in a tight panel, while a very long lead can tangle. If a listing shows a lead set in the box, note its length, because you will be reaching into equipment with it every time you test.
Related guides
If you are comparing non-contact testers as well, read our guide to the best non contact voltage checker for a second opinion on pocket testers. For Klein models specifically, our Klein Tools voltage detector roundup covers how those tools compare with a full multimeter.
FAQ
Is the Milwaukee 2212-20 a multimeter?
It is an auto-function voltage and continuity tester. Retailer listings describe it as switching between voltage and continuity on its own, and they list 600V AC/DC voltage and a CAT IV 600V rating. Check the manual for the full function list before you rely on it for a specific measurement.
Does the Milwaukee 2212-20 use AAA batteries?
The retailer pages we opened list two AAA batteries in the box and AAA alkaline batteries as the power source. We did not verify battery life from those pages.
Which alternative is closest to the Milwaukee?
The KAIWEETS meter has the closest title match, because its listing mentions both voltage and continuity with auto-ranging. The Klein MM420 is a strong voltage meter, but its title does not mention continuity. The CT6101 is only a continuity tester.
Can I use these tools for automotive work?
The Autel PS100 is designed for 12 to 24V automotive circuits. The other picks are general electrical tools, so check each listing and its safety rating before you use it on a vehicle or a mains circuit.
Sources
- thepowertoolstore.com, Milwaukee 2212-20 product page (opened 2026-10-29)
- maxtool.com, Milwaukee 2212-20 600V auto-function meter page (opened 2026-10-29)
- pcstools.com, Milwaukee 2212-20 auto voltage continuity tester page (opened 2026-10-29)






