Best Ct 20 Cable Tester
A ct 20 cable tester is most often the Extech CT20, a one-person continuity and wire identification tool with a remote probe that can label cables across a long run. The Extech manufacturer page describes it as rated for test lengths up to 3,000 meters, while the Markertek listing says the item is no longer available. This guide explains what the CT20 does, what the sources say about its status, and four cable and wire testers from our product list that cover similar jobs. As an Amazon Associate this site earns from qualifying purchases.
Quick answer
Buy the CT20 only after you confirm stock with the seller, because one retailer says it is no longer available while the manufacturer page still lists it. If you need a similar wire-identification tool, the Klein VDV500 and VDV501 families in our product list cover tone-based wire tracing, continuity and cable testing. Match the tool to the cable type you work on.
What the CT20 does
The Extech product page describes the CT20 as a continuity tester for checking circuits and identifying cables and wires. One user can identify and label two wires even when the ends are in different rooms, and the Remote Continuity mode can check continuity and identify two or more cables at once. The page gives a remote range of 10,000 feet, or 3,000 meters, with a 26-gauge minimum wire size. It lists a two-lead bi-color red and green flashing LED remote probe that identifies up to three wires, an 85 dB beeper alarm, and power from one 9-volt battery.
The Extech page also says the tester drives a 20 milliamp DC pulse through the wires to the remote probe. The Markertek listing describes the same remote probe and cable range, and it says the probe clips onto the cable under test.
The availability conflict
The two sources disagree on whether the CT20 can still be bought. The Extech page shows a Buy Now option, a two-year warranty and CE certification, and it gives no stock figure. The Markertek page says the item is no longer available and suggests asking a Markertek expert for a substitute. Check the current status with the seller before you plan a job around this tool.
What continuity testing means for cable work
The Wikipedia article on continuity testing explains the basic principle. A small voltage is applied across a path, and if current can flow, the path is continuous. A broken conductor or excessive resistance blocks the flow and shows as an open circuit. Simple testers often use a light that lights when current flows. The same article notes that power must be disconnected before testing, because the tester works by trying to close a circuit.
The article also lists limits. Motors, transformers, inductors and some diodes can make a continuity reading ambiguous. That matters for cable work when a run passes through equipment, so isolate the circuit first and test the conductors at a known point.
How we chose these four alternatives
We limited the list to Klein cable and wire testers in our product file whose titles name cable, wire or continuity work. We left out outlet testers and breaker finders because they are built for a different job, and we left out accessory sets. The specs below come from our product titles, and we say so where a title is the only source. When you compare them, think about the job first: a one-person wire label job, a bundle trace through a wall, and a phone or coax run each favor a different tool. A tool that fits one of those jobs will often feel clumsy on another, so a quick look at the job list will save a return.
Klein VDV500-063 Wire Tracer and Tone Generator Continuity Tester
The VDV500-063 title describes a tone generator and continuity tester for Ethernet, telephone, speaker, coax, video and data cables. A tone generator is the feature to look for when you need to trace a wire through a bundle, because the tone travels along the conductor and a probe finds it. This is closer to the CT20’s wire identification role than a simple continuity meter, and it works on more cable types.
The title does not state a maximum test distance, so check the product page if you need a long run.
Klein VDV500-123 Wire Tracer Probe with LED Work Light
The VDV500-123 title describes a wire tracing probe with an LED work light for Ethernet, internet, telephone, speaker, coax, video and data cables. A probe with a work light is useful when you are working in a ceiling or a crawlspace. This tool is a probe rather than a complete tester, so it pairs with a tone generator such as the VDV500-063.
Klein VDV512-101 Coax Explorer 2 Tester with Four Remotes
The VDV512-101 title describes a push-button coax tester with four remotes for wire tracing, testing and mapping coaxial cable. The four remotes let one person identify several coax runs at the same time, which fits a job with many outlets. The title names coax only, so it does not cover telephone or data runs without the matching adapters.
Klein VDV501-851 Scout Pro 3 Tester Starter Set
The VDV501-851 title describes a starter set for RJ11, RJ12, RJ45 and coax cable testing, with a self-storing remote and LAN and coax mapping locators. It is the most complete kit of the four and the one for a technician who tests phone, network and coax lines in the same visit. Its price and size are not in the title, so compare them on the product page.
Which to choose
If you want the closest match to the CT20’s one-person wire identification, the VDV500-063 with its tone generator is the best fit on this list. For a coax-only job, the VDV512-101 is the better choice. For a mixed phone, network and coax job, the VDV501-851 kit covers more connector types. The VDV500-123 probe works best as an add-on to a tone generator.
For a broader look at continuity checks, see our how to use a continuity tester guide, and for handheld testers, see best continuity tester.
What we could not verify
- Whether the CT20 is in stock. The Extech and Markertek pages disagree.
- Test distances, frequency ranges and accuracy for the four Klein products. Our titles do not give them, and we did not open their product pages.
- Compatibility with your specific cable type. Check each product page before you buy.
- Current prices. None are quoted.
FAQ
What does the CT20 test?
The Extech page describes continuity and wire identification, including remote identification of up to three wires at once through a bi-color probe.
How far can the CT20 reach?
The Extech page lists up to 3,000 meters, or 10,000 feet, on a 26-gauge minimum wire.
Is the CT20 still for sale?
The Extech page lists it with a price, while the Markertek page says it is no longer available. Ask the seller before you buy.
Does continuity testing need power on the circuit?
No. The Wikipedia article says power must be disconnected before testing, because the tester tries to close the circuit.
Sources
- Extech, CT20 product page: https://www.extech.com/products/ct20/ (opened 2026-10-29)
- Markertek, Extech CT20 product listing: https://www.markertek.com/product/ext-ct20/extech-ct20-pocket-sized-remote-and-local-continuity-wire-and-cable-tester (opened 2026-10-29)
- Wikipedia, “Continuity test”: https://en.wikipedia.org/wiki/Continuity_test (opened 2026-10-29)






